Rollo de Acero Galvanizado en Caliente Pre pintado (PPGI)
Rollo de Acero Galvanizado en Caliente Pre pintado (PPGI)
Rollo de Acero cubierto de 5% de Aluminio y Zinc Pre pintado(PPGF)
Rollo de Acero Cubiero de 55% de Aluminio y Zinc Pre Pintado (PPGL)
Pre-painted Hot-dip Galvanized Steel Coil
Pre-painted Hot-dip 5% Al-Zn Coated Steel Coil
Pre-painted Hot-dip 55% Al-Zn Coated Steel Coil
|
Product Type
|
Coating Type
|
Product Spec.
|
Substrate Spec. | Coating Designation | Coating Thickness | ||
|
1.Pre-painted Hot-dip Galvanized Steel Coil (PPGI) 2.Pre-painted Hot-dip 5% Al-Zn Coated Steel Coil (PPGF) 3.Pre-painted Hot-dip 55%Al-Zn Coated |
1.Polyester 2.Silicone Modified 3.Acrylic 4.PVDF |
JIS G3312
(1994) |
CGCC, CGCH,
CGCD1, CGC340, CGC400, CGC440, CGC490, CGC570 |
JIS G3302
(1998) |
SGCC, SGCH,
SGCD1, SGC340, SGC400, SGC440, SGC490, SGC570 |
JIS G3302
Z10, Z12, Z18, Z20, Z22, Z25, Z27,Z35 |
Top Primer:
PU or Epoxy 5umTop Coat: 15~25um Back Coat: |
|
JIS G3318 |
CZACC, CZACH,
CZACD1, CZAC340, CZAC400, CZAC440, CZAC490, CZAC570 |
JIS G3317
(1994) |
SZACC, SZACH,
SZACH1, SZAC340, SZAC400, SZAC440, SZAC490, SZAC570 |
JIS G3317 (1994)
Y12, Y18, Y20, Y22, Y25, Y27 |
|||
|
JIS G3322
(1998) |
CGLCC, CGLCD,
CGLC400, CGLC440, CGLC490, CGLC570 |
JIS G3321
(1998) |
SGLCC, SGLC400,
SGLC440, SGLC490, SGLC570 |
JIS G3321 (1998)
AZ90, AZ120, AZ150, AZ170 |
|||
|
ASTM A755M
(2001) |
ASTM A653M
(2003) |
CS TYPE A, B, C
FS TYPE A, B SS Grade 230, 255, 275, 340 DDS |
ASTM A653M (2003)
Z100, Z120, Z180, Z275, Z350 |
||||
|
ASTM A875M
(2002) |
ASTM A875M (2002)
ZGF90, ZGF135, ZGF180, ZGF225, ZGF275 |
||||||
|
ASTM A792M
(2003) |
ASTM A792M (2003)
AZ150, AZ165, AZ180 |
||||||
|
EN 10169
(1997) |
EN 10142
(2000) |
DX51D, DX52D,
DX53D |
EN 10142 (2000)
Z100, Z140, Z200, Z225, Z275 |
||||
|
EN 10147
(2000) |
S220GD, S250GD,
S280GD, S320GD, S350GD, S550GD |
EN 10147 (2000)
Z100, Z140, Z200, Z225, Z275 |
|||||
|
EN 10214
(1995) |
S220GD DX51D,
S250GD DX52D, S280GD DX53D, S320GD, S350GD, S555GD |
EN 10214 (1995)
ZA95, ZA130, ZA185, ZA200, ZA255 |
|||||
|
EN 10215
(1995) |
EN 10215 (1995)
ZA100, AZ150, AZ185 |
||||||
|
Remark
|
1.Protective Film can be applied 2.The ASTM standards presented here adopt the imperial system (The equivalent metric system is marked by the “M” after the specification number, such as A755M and A792M) 3.Coating Thickness is for reference only. |
||||||
Available Size
Pre-painted Hot-dip Galvanized Steel Coil
Thickness: 0.2~1.5mm
Width: 700~1534mm
Pre-painted 5% Al-Zn Coated Steel Coil
Thickness: 0.2~1.5mm
Width: 700~1260mm
Pre-painted 55% Al-Zn Coated Steel Coil
Thickness: 0.2~1.25mm
Width: 700~1220mm
Standard Color
Pre-painted Hot-dip Galvanized Steel Coil
